Metallic vs. non metallic paint
So my beloved TCH, with a ding in the windshild, now has a big ding in the hood as well. Given the size of the boulder bouncing off the hood, I'm surprised Earth is still in its normal orbit. Anyway, grumble, grumble, I touched up the paint of my non-metallic SuperWhite and came to realize the paint seems pretty durable. A couple of door dings have also not broken the paint. The car is also not showing scratches, despite a couple of kids dragging all sorts of stuff across the car. Am I just lucky, am I blind, or is non-metallic paint more durable than metallic paint? Maybe the undercoat is white, so I don't see blemishes? I dunno.
Your white paint is much more damage resistant than metallic colors, especially darker ones.
I have a Mag Grey and every little imperfection will show. Even small surface scratches.
I have a Mag Grey and every little imperfection will show. Even small surface scratches.
We need a rock-hard clear coat.
What makes a paint metallic?
I just had Ziebart's Diamond Gloss clear coat put on mine, with the ClearShield paint protection film put on the front. I don't yet know how well the Diamond Gloss will help against marking, but it sure looks nice right now!
How much did that cost you? I also have two paint blemishes on the hood. I am truly disappointed with the paint quality. It is my number one complaint for the car.
The kicker is that on the ClearShield application, they couldn't do the nose piece around the grill as one piece, so they cut it. Now that doesn't bother me so much, but on one side the cut was so crooked, and left such a big gap, that from a distance it looked like a scratch.
So I took it back at lunch time today, and complained that for $500 (the ClearShield portion) I expected a better job than I can do myself (and I'm pretty sure I wouldn't have messed it up that badly). After I hinted that my showing off this job wasn't the best advertising Ziebart could have, they agreed to redo it - so I get it done next Monday.
It cost a small fortune, but then, I didn't try to negotiate - I just wanted it done. So, $750 CDN altogether.
The kicker is that on the ClearShield application, they couldn't do the nose piece around the grill as one piece, so they cut it. Now that doesn't bother me so much, but on one side the cut was so crooked, and left such a big gap, that from a distance it looked like a scratch.
So I took it back at lunch time today, and complained that for $500 (the ClearShield portion) I expected a better job than I can do myself (and I'm pretty sure I wouldn't have messed it up that badly). After I hinted that my showing off this job wasn't the best advertising Ziebart could have, they agreed to redo it - so I get it done next Monday.
The kicker is that on the ClearShield application, they couldn't do the nose piece around the grill as one piece, so they cut it. Now that doesn't bother me so much, but on one side the cut was so crooked, and left such a big gap, that from a distance it looked like a scratch.
So I took it back at lunch time today, and complained that for $500 (the ClearShield portion) I expected a better job than I can do myself (and I'm pretty sure I wouldn't have messed it up that badly). After I hinted that my showing off this job wasn't the best advertising Ziebart could have, they agreed to redo it - so I get it done next Monday.
And good job getting them to do it again.
Thread
Topic Starter
Forum
Replies
Last Post
jeffeynboo
Toyota Camry Hybrid
25
Aug 14, 2006 11:17 AM
MisterMac
Honda Civic Hybrid
14
Apr 10, 2006 08:37 PM





