i see now t need to use the mini disc that was included

hope to have a charger today, going out of town tomorrow

 

Thanks, hope you get it working. I'm about to order this one: https://smile.amazon.com/gp/product/...P6N0Z6QL&psc=1

 

I have one of those. It seems to be a little better than most of the $10-12 ones when working with Torque Pro.

 

Thanks. I'm hoping it will also work with Forscan too. I need to start troubleshooting a problem with loss of regen braking, but no codes on SG or dashboard indicators. I thought Forscan might be more comprehensive than SG.

 

one of these threads mentioned grounding problems on the brakes, maybe it was a regen thread, did you check them?

got half way through the jump starts, had to run into work, starting over, should be done in an hour

 

Good tip, thanks, I'll search for that.

I'll start a new thread on my problem, don't want to hijack yours.

 

no changes after jump charging, will try again tomorrrow

 

still no change other than the recharge button lights up but there is no draw on the 12v battery, guessing this means the bank is full

still getting the code for tcm low voltage

when i start the engine it idles fine for a few seconds, then starts to hunt for a few then the ssn, makes me wonder about the throttle body

 

Are you doing the jump start with the key off?

 

would not charge either way, but this morning, after sitting with 12v disconnected overnight, it has just responded normally

will continue after work this afternoon