mouldings
#2
Re: mouldings
Question on the door sills...when I bought my car, there was plastic coming out from under the door sills. When washing to car, I proceded to try and pull the plastic out. However, I had to lift up the door sill cover and noticed the plastic wrapped around wires under the sill...So my question is, should this plastic not be removed or should it have been removed during the PDI process? Were your wires wrapped in plastic?
Thanks!
Thanks!
Originally Posted by skywagon
Received my side door mouldings and stainless door step plates, easy to install and look great, these are genuine Toyota parts.
#3
Re: mouldings
Lem144, these moldings have contact tape on the backside, you clean the plastic with 3-M cleaner and stick them on the same as the side moldings. I did not need to take off the plastic sill moldings so do not know how the wires were wraped. I suspect these cars came with plastic over the sill plates so not to scuff them up and the plastic was screwed down under sill plate which should not create a problem. sk
#4
Re: mouldings
Originally Posted by skywagon
Lem144, these moldings have contact tape on the backside, you clean the plastic with 3-M cleaner and stick them on the same as the side moldings. I did not need to take off the plastic sill moldings so do not know how the wires were wraped. I suspect these cars came with plastic over the sill plates so not to scuff them up and the plastic was screwed down under sill plate which should not create a problem. sk
#6
Re: mouldings
Originally Posted by skywagon
Yes, and they say Camry on them look sharp. sk
Enjoy it though.
#7
Re: mouldings
Originally Posted by lem144
so the stainless steel sill covers stick to the existing plastic sill covers? that's strange, i'd imagine they would replace the plastic covers.
#8
Re: mouldings
Originally Posted by ronr
They are not stainless steel. They are made of aluminum.
Upon inspecting the picture, I notice it doesn't even go over the top of the sill. Why is it so expensive. It seems to be very cheap. Anyway, just my $.02.
#9
Re: mouldings
Originally Posted by skywagon
Received my side door mouldings and stainless door step plates, easy to install and look great, these are genuine Toyota parts.
department to install it today. They didn't install it because of what looked like small chips taken out on the end. They are re-ordering the kit. Looks like they
may have a QC problem with some of these parts.