Rattles - fixed one, need help on 2nd
UPDATE
Just got back from the dealer and the clunk rattle was caused by the link on the front stabilizer bar.
I Googled this issue and it seems this is a very common problem on all Escapes (not just FEH). It felt kinda loose when I checked it, so I was pretty sure going in that this was the problem.
If you want to check this on your own Escape, I think the tire needs to be on the ground, other wise the link is loaded and you will not feel the slop in the end joints.
Just got back from the dealer and the clunk rattle was caused by the link on the front stabilizer bar.
I Googled this issue and it seems this is a very common problem on all Escapes (not just FEH). It felt kinda loose when I checked it, so I was pretty sure going in that this was the problem.
If you want to check this on your own Escape, I think the tire needs to be on the ground, other wise the link is loaded and you will not feel the slop in the end joints.
UPDATE
Just got back from the dealer and the clunk rattle was caused by the link on the front stabilizer bar.
I Googled this issue and it seems this is a very common problem on all Escapes (not just FEH). It felt kinda loose when I checked it, so I was pretty sure going in that this was the problem.
If you want to check this on your own Escape, I think the tire needs to be on the ground, other wise the link is loaded and you will not feel the slop in the end joints.
Just got back from the dealer and the clunk rattle was caused by the link on the front stabilizer bar.
I Googled this issue and it seems this is a very common problem on all Escapes (not just FEH). It felt kinda loose when I checked it, so I was pretty sure going in that this was the problem.
If you want to check this on your own Escape, I think the tire needs to be on the ground, other wise the link is loaded and you will not feel the slop in the end joints.
Replace the sway bar link(s). It is a plastic rod about 6" long with a ball joint on each end. It is an easy DIY job and the part is about $20, but since I was still under warranty, I had it done.
Thread
Topic Starter
Forum
Replies
Last Post
Davis_Walker
Fuel Economy & Emissions
2
Oct 7, 2014 04:48 PM
Jason
Website Questions & Input
2
May 26, 2005 12:42 AM





