Keypad entry?
#21
Re: Keypad entry?
Sometimes the default code is also hidden somewhere in the car too in case you forget it. On a '97 Explorer I had, the default code was on a label on the underside of the top of the compartment where the jack was stored in the back.
#22
Re: Keypad entry?
Got my keypad today. Unfortunatly I can't figure out how to program it. I tried following the directions in the box, but they stop at 2004 models (but it's the same from 01-04). I tried looking in the owners manual, but to program a remote it says follow the program key instructions, ok but I can't stick a keypad in the ignition.
So does anyone know how to get into the programming mode for a remote only for the 08's?
So does anyone know how to get into the programming mode for a remote only for the 08's?
#23
Re: Program a new remote for 08
I don't recall exactly, but getting it on mine (2006) it was something like with all devices present, put the key in the ignition, flip it to acc 2, back to off, back to acc2, back to off, back to acc2, then hit lock with each device.
That's probably not it, but it's something similar to that. (It was 2 years ago!)
That's probably not it, but it's something similar to that. (It was 2 years ago!)
#24
Re: Keypad entry?
Is it possible that the locking mechanism was changed in 2008 that made the earlier model keypads incompatible? That would explain why the dealer would not provide one. Has anyone seen a 2008 Escape (hybrid & non-hybrid) with one?
Cheers,
rcomeau
Cheers,
rcomeau
#25
Re: Keypad entry?
"Convenience Package: dual illuminated visors, compass, auto-dim rearview mirror, keyless entry keypad, message center, outside temperature display, overhead console"
#26
Re: Keypad entry?
I noticed that the Ford 'accessories' store (the factory store... not aftermarket stores) show it as an option for the '05 FEH, but not for other years. Maybe Ford stopped selling it after '05. I'm thinking most people are using aftermarket keypads (and it wouldn't at all surprise me if they were still made by the original supplier).
#27
Re: Keypad entry?
Got my keypad today. Unfortunatly I can't figure out how to program it. I tried following the directions in the box, but they stop at 2004 models (but it's the same from 01-04). I tried looking in the owners manual, but to program a remote it says follow the program key instructions, ok but I can't stick a keypad in the ignition.
So does anyone know how to get into the programming mode for a remote only for the 08's?
So does anyone know how to get into the programming mode for a remote only for the 08's?
So now I have a keypad on my 08!
#29
Re: Keypad entry?
Thanks in advance...
#30
Re: Keypad entry?
I put a keyless entry pad on my 05 Escape Hybrid via the "quick 8 on-off ignition key turns". I used a new but older 04 keyless entry pad that I found on e-bay at a cheap price.