2007 FEH blown engine.

Old Mar 8, 2016 | 10:00 PM
  #1  
Organica1's Avatar
Thread Starter
|
Enthusiast
Joined: Jul 2015
Posts: 18
Default 2007 FEH blown engine.

My engine blew in my 2007 FEH, has anyone replaced theirs? I intend to purchase one on ebay.


Thank you.
 
Old Mar 9, 2016 | 08:04 AM
  #2  
econoline's Avatar
Ridiculously Active Enthusiast
Joined: Mar 2006
Posts: 942
From: Ventura, CA
Default Re: 2007 FEH blown engine.

Can you give us some details about what happened to your engine? Just curious as an owner of a '07.

If you search for "blown engine" there are several threads to be found.
 
Old Mar 9, 2016 | 08:08 AM
  #3  
Organica1's Avatar
Thread Starter
|
Enthusiast
Joined: Jul 2015
Posts: 18
Default Re: 2007 FEH blown engine.

Originally Posted by econoline
Can you give us some details about what happened to your engine? Just curious as an owner of a '07.

If you search for "blown engine" there are several threads to be found.

Delivered a 50cc dirt bike to a friend and on return trip home; cruise control at 65, engine started to knock, a long grade was approaching and engine had a great loss of power.

Red triangle popped on and gasoline engine shut itself down. I was able to drive EV. Pulled over, no codes found with scan gauge. Towed it home.

Not considering replacement engine, a friend wants $600 to change it.

Thanks. (Up until now my FEH ran the same everyday (AWD) 32-33 AVG MPG 24/7.)
 
Old Apr 2, 2016 | 09:43 PM
  #4  
spud's Avatar
Active Enthusiast
Joined: Aug 2006
Posts: 152
From: Oregon
Default Re: 2007 FEH blown engine.

Rebuild-able? Thrown rod?
 
Old Apr 4, 2016 | 07:03 AM
  #5  
Organica1's Avatar
Thread Starter
|
Enthusiast
Joined: Jul 2015
Posts: 18
Default Re: 2007 FEH blown engine.

Originally Posted by spud
Rebuild-able? Thrown rod?
I replaced the engine myself in my garage, I bought a used long block.

Removing all the hoses is time consuming, separating the engine from the transmission is pretty easy.

I removed my engine from the top, i had to cut into the intake manifold with a saw-zall, the new engine was slid sideways under the car on a creeper and lifting vertically into place with an engine crane.

The car now runs again without any errors and my gas milage is back to 30-32 all the time.



Upon inspection of the old motor, the thermostat was stuck open and it has spun a rod bearing on #1 cylinder.


If you have other questions please ask. Thank you.
 
Old Apr 4, 2016 | 11:11 AM
  #6  
econoline's Avatar
Ridiculously Active Enthusiast
Joined: Mar 2006
Posts: 942
From: Ventura, CA
Default Re: 2007 FEH blown engine.

Dennis, glad you got it repaired.

How many miles were on the original engine when it failed?
 
Old Apr 4, 2016 | 11:16 AM
  #7  
Organica1's Avatar
Thread Starter
|
Enthusiast
Joined: Jul 2015
Posts: 18
Default Re: 2007 FEH blown engine.

Originally Posted by econoline
Dennis, glad you got it repaired.

How many miles were on the original engine when it failed?
132,670

The only issue I had with the the vehicle since 2007 was the front coolant pump and the battery fans, both of which I repaired a while back.

When the bearing spun I was going 65mph on cruise control, no lights, no oil light, it just lost a ton of power and the notable tick, tick, tick, tick.



New engine runs great!
 
Old Apr 6, 2016 | 05:11 AM
  #8  
wptski's Avatar
Imported from Detroit
Joined: Apr 2009
Posts: 1,051
From: Michigan
Default Re: 2007 FEH blown engine.

Originally Posted by Organica1
I replaced the engine myself in my garage, I bought a used long block.

Removing all the hoses is time consuming, separating the engine from the transmission is pretty easy.

I removed my engine from the top, i had to cut into the intake manifold with a saw-zall, the new engine was slid sideways under the car on a creeper and lifting vertically into place with an engine crane.

The car now runs again without any errors and my gas milage is back to 30-32 all the time.



Upon inspection of the old motor, the thermostat was stuck open and it has spun a rod bearing on #1 cylinder.


If you have other questions please ask. Thank you.
This about the third or fourth mentioned in this forum and the owner always gets blamed.

Here's two that I found.

https://www.greenhybrid.com/forums/f...rebuild-25069/

https://www.greenhybrid.com/forums/f...0-miles-22393/
 
Old Apr 6, 2016 | 05:15 AM
  #9  
Organica1's Avatar
Thread Starter
|
Enthusiast
Joined: Jul 2015
Posts: 18
Default Re: 2007 FEH blown engine.

Originally Posted by wptski
This about the third or fourth mentioned in this forum and the owner always gets blamed.

Here's two that I found.

https://www.greenhybrid.com/forums/f...rebuild-25069/





The engine and CVT do not have to be removed together. I left my transfer case PTO and cvt in place. It slid off similar to a traditional transmission. The (one way clutch) just looks like a dampner with springs in it.

Thanks everyone.

https://www.greenhybrid.com/forums/f...0-miles-22393/
 
Related Topics
Thread
Topic Starter
Forum
Replies
Last Post
lisamichelle
Honda Civic Hybrid
2
Jul 25, 2013 09:52 AM
talljetman2
Toyota Camry Hybrid
3
Feb 16, 2009 12:56 PM
AshenGrey
HCH I-Specific Discussions
5
May 22, 2008 06:31 PM
guicide
HCH II-Specific Discussions
2
Aug 2, 2006 03:52 AM
Fernypants
Honda Civic Hybrid
2
Jun 29, 2005 04:46 AM


Thread Tools
Search this Thread

Contact Us -

  • Your Privacy Choices
  • Manage Preferences
  • Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

    When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

    © 2026 MH Sub I, LLC dba Internet Brands


    All times are GMT -7. The time now is 08:29 AM.