My Post Pictures

August 22, 2020

6

0

Here's my charger, expertly assembled by my big brother, a soldering and electronics guru. Power cord is from Home Depot

Here's my charger, expertly assembled by my big brother, a soldering and electronics guru. Power cord is from Home Depot

0 2020/08/22 17:02:34 jgATL

Here's the relay connection. Put the female on the battery side, have a 2A fuse in the middle and the 2 diodes are each covered individually with shrink wrap tubes, and secured together underneath the green shrinkwrap tube. Purple shrinkwrap covers the sodler from the 12 Ga fuse wire to the 18 Ga lead wires.

Here's the relay connection. Put the female on the battery side, have a 2A fuse in the middle and the 2 diodes are each covered individually with shrink wrap tubes, and secured together underneath the green shrinkwrap tube. Purple shrinkwrap covers the sodler from the 12 Ga fuse wire to the 18 Ga lead wires.

0 2020/08/22 17:01:39 jgATL

Used a 3/16 inch drill bit, leaves a little room for filling with silicone. Don't forget to thread the wires through first and then crimp your ring terminals onto the wire once it's inside.

Used a 3/16 inch drill bit, leaves a little room for filling with silicone. Don't forget to thread the wires through first and then crimp your ring terminals onto the wire once it's inside.

0 2020/08/22 17:01:26 jgATL

I forgot to add the connecting block in the foreground. This was my third install of the relay.

I forgot to add the connecting block in the foreground. This was my third install of the relay.

0 2020/08/22 16:50:52 jgATL

Terminals go on top for the HV Relay. I must have tried this 4 times before figuring it out.

Terminals go on top for the HV Relay. I must have tried this 4 times before figuring it out.

0 2020/08/22 16:50:31 jgATL

0 2020/08/22 16:23:31 jgATL