water4gas?
#1
water4gas?
Did anyone else receive this in their email, and if so, what do you think?
http://water4gas.com/2books.htm?hop=terrells
http://water4gas.com/2books.htm?hop=terrells
#4
Re: water4gas?
Did anyone else receive this in their email, and if so, what do you think?
http://water4gas .com/2books.htm?hop=referral
http://water4gas .com/2books.htm?hop=referral
Last edited by HemiSync; 06-03-2008 at 08:22 PM.
#6
Water4gas parts in europe?
Hi
We are a couple of friends that purchased the water4gas design approx 3 weeks ago via the site http://www.water4gasdownloads.com/water4gas-kit.html. Unfortunately we have still not installed any of the devices because all parts in the books are referring to US stores, installers and specific product numbers, the problem is that we live in Europe and it’s very hard to build the system this way. Douse anyone know where we can by the water4gas kit in Germany or Austria? We have approx 30 days left to refund our money; has anyone built this system in Europe? We would be grateful for any comments!
We are a couple of friends that purchased the water4gas design approx 3 weeks ago via the site http://www.water4gasdownloads.com/water4gas-kit.html. Unfortunately we have still not installed any of the devices because all parts in the books are referring to US stores, installers and specific product numbers, the problem is that we live in Europe and it’s very hard to build the system this way. Douse anyone know where we can by the water4gas kit in Germany or Austria? We have approx 30 days left to refund our money; has anyone built this system in Europe? We would be grateful for any comments!
#7
Re: water4gas?
I'd be very careful and do a heck of a lot of research before I installed one of those "kits". The research I've done so far shows that introducing a hydrogen flow into you air induction can severely alter the oxygen output of the combustion process which can result in the oxygen sensors reading the engine condition as too lean. This will cause the ECC to boost the mixture to RICH to compensate for the lean condition. This has the effect of not only negating any FE gains, but will drop FE below the pre-install levels.
The solutions available for this problem include trying to trick the Mass Airflow Sensor or replacing the O2 sensors with dummy sensor that tell the ECC lies about exhaust O2 levels.
I have no idea what one of these kits would do the the HCHII's computer system.
The solutions available for this problem include trying to trick the Mass Airflow Sensor or replacing the O2 sensors with dummy sensor that tell the ECC lies about exhaust O2 levels.
I have no idea what one of these kits would do the the HCHII's computer system.
#8
Re: water4gas?
Their site tells you that you need to fix the lean condition problems with the following device:
MAP Sensor Enhancer: When the HHO system improves the combustion quality, the oxygen sensor in your car will see much more oxygen and begin injecting more fuel. When this happens you will probably not see any mileage improvements due to the computer fighting against the Water4Gas device. The MAP Sensor Enhancer allows you to adjust the fuel injection and the amount of fuel going into the engine. The enhancer is very important for fine tuning your HHO system.
It appears to me that you are messing with the ECC and bypassing it for altering fuel/air ratio mixture.
MAP Sensor Enhancer: When the HHO system improves the combustion quality, the oxygen sensor in your car will see much more oxygen and begin injecting more fuel. When this happens you will probably not see any mileage improvements due to the computer fighting against the Water4Gas device. The MAP Sensor Enhancer allows you to adjust the fuel injection and the amount of fuel going into the engine. The enhancer is very important for fine tuning your HHO system.
It appears to me that you are messing with the ECC and bypassing it for altering fuel/air ratio mixture.
#9