ordered my volsnt intake wed
#1
ordered my volant intake wed
got here friday! of course thurs i had my left rotator cuff repaired and the tendons reattached that were torn away,,,,,I dont think i will install it any time soon...
Last edited by jet1; 03-12-2010 at 02:06 PM.
#2
Re: ordered my volsnt intake wed
Jet 1 hope you feel better. Make sure all the parts arrived, my kit was missing parts. Its about 2 hrs to install, not to bad at all, looks great and you will see a MPG improvement.
#9
Re: ordered my volsnt intake wed
Thanks. I see in Ken's pictures that it appears to be a large bore and large radius to the throttle body. Should increase flow. Air turns corners better with larger radii. Also no Helmholtz Resonators. The factory puts in those funny shaped appendages to reduce induction noise for pass by db regulations. Volume, length, and opening area = Hz.
The sound should be quite different. Hopefully a nice V8 roar not a 4 cyl MOO.
The sound should be quite different. Hopefully a nice V8 roar not a 4 cyl MOO.
#10
Re: ordered my volsnt intake wed
It has a nice V8 roar and you reuse the mass air flow sensor. I used the carb shop flow chamber to check it. The chamber is designed for stromburg carbs (Radial Engines Carbs), No a requirement just wanted to make sure the set point was the same and would work, its fine.